an antistatic cuff or ensure you are touching an earthed, metallic object. We will
charge for any repairs to damage caused by incorrect handling.
Recycling and Disposal
Should you have any questions concerning the disposal please contact your dealer or
customer service.
Packaging
Your device has been packaged to protect it against transportation
damage. Packaging is raw material and can be re-used or added to the
recycling system.
Device
The device is fi tted with an integrated battery. At the end of its operating
life, do not dispose of the device with your ordinary household trash.
Consult your local authority to fi nd out about collection centres for
environmentally sound disposal of electrical and electronic scrap.
European EN ISO 9241-307 Class II Standard
Due to the very high number of transistors and the associated extremely complex
manufacturing processes used, occasionally one or more pixels can fail or become
incorrectly controlled.
In the past, there were a number of approaches for defi ning the permitted number
of pixel defects. However, these approaches were mostly very complicated and
varied from one manufacturer to the next. When handling warranty issues for all
of its display products, MEDION therefore adheres to the strict and transparent
requirements of the standard EN ISO 9241-307, Class II; which has been briefl y
summarised below.
The EN ISO 9241-307 standard defi nes, amongst other things, the generally applicable
guidelines relating to pixel defects. Pixel defects are categorised into four fault classes
and three defect types. Every individual pixel consists of three sub-pixels, each of
which is assigned a basic colour (red, green, blue).
Pixel structure
Recycling and Disposal
40
To Next Page
Loading...
Need help?
General