37
Switching on and off automati-
cally
The device can be switched on or off automatically at a set
time.
Set the time and the date as described from Page 32.
Mark the Auto on/off sub-menu.
Press the OK button.
You can only use this function if the on/off switch is at
the “ON” position.
Setting the switching-on time
Select the ‘Auto On’ menu point.
Press the OK button.
The current setting of the switching-on time will be displayed.
The ‘Hour’ setting will be marked.
Press the UP or DOWN navigation button until the required
value is displayed, to set the hour.
Press the OK BUTTON to mark the setting of the minutes.
Press the UP or DOWN navigation button until the required
value is displayed, to set the minutes.
Press OK to save the setting.
To Next Page
Loading...