52
Ending a slide show
Press the ESC button to end a slide show.
The overview window will be displayed.
Viewing individual images
Mark the required photo in the overview window.
Press the OK button.
The image will be displayed together with a selection menu.
Press the ESC button if you want to view the photo.
The selection menu will be faded out. Now you will be able to
view the displayed photo.
The selection menu will be faded out automatically
after about ten seconds if you have not pressed a
button during this period.
Press the ESC button to display the overview window.
Press the UP navigation button to display the next photo.
Press the DOWN navigation button to display the previous
photo.
It can take several seconds until the photo is displayed,
according to the size of the other photos.
Press the MENU button to display the selection menu
again.
You can use the following function for the displayed photo:
Start a slide show from the displayed photo,
Rotate the photo,
Enlarge the photo,
Copy the photo or
Delete the photo.
To Next Page
Loading...