Need help?Do you have a question about the Medisoft FeNO+ and is the answer not in the manual?
Advises against wet/dusty conditions and obstructing the cooling ventilator.
Explains sensor polarization, battery role, and warm-up time requirements.
Steps for preparing the FeNO+ device and accessories for calibration.
Guides through initializing the calibration mode in the Expair software.
Details the process for calibrating the pneumotachograph's volume measurement.
Step-by-step guide to calibrating the pneumotachograph using a syringe.
Procedure to check the pneumotachograph calibration using the Check button.
Details the procedure and requirements for NO gas calibration.
Step-by-step guide for replacing the pneumotachograph mesh.
General| Dimensions | 280 mm (W) x 200 mm (H) x 250 mm (D) |
|---|---|
| Weight | 4.5 kg |
| Device Type | Fractional Exhaled Nitric Oxide (FeNO) Analyzer |
| Measured Parameter | Fractional exhaled Nitric Oxide (FeNO) |
| Measurement Range | 5-300 ppb |
| Measurement Accuracy | ±5 ppb or ±10% (whichever is greater) |
| Flow Rate | 50 mL/s |
| Age Range | 4 years and above |
| Connectivity | USB |
| Calibration | Automatic |
To Next Page
