-14-
1. BATTERY LOADING
a. Open battery cover at the back of the monitor.
b. Load 2 “AAA” size batteries. Please pay attention to polarity.
c. Close the battery cover.
When LCD shows battery symbol , replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid
damage or battery leakage.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
2. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD
will display time and date by turns. See picture 2 and 2.1.
b. While the monitor is in Clock Mode, press both the “START” and “MEM” button
simultaneously, a beep is heard and the month will blink at first. See picture 2-2.
Press the button “START” repeatedly, the day, hour and minute will blink turn.
SETUP AND OPERATING PROCEDURES
To Next Page
Loading...
Need help?
General
