-6-
Based on Oscillometric methodology and silicon integrated pressure sensor, blood
pressure and pulse rate can be measured automatically and non-invasively. The LCD
display will show blood pressure and pulse rate. The most recent 1 X 60 measurements
can be stored in the memory with date and time stamp. The monitor can also show the
average reading of the last three measurements. The Electronic Sphygmomanometer
corresponds to the below standards: IEC 60601-1Edition 3.1 2012-08/EN 60601-1:2006/
A1:2013 (Medical electrical equipment -- Part 1: General requirements for basic safety
and essential performance), IEC60601-1-2:2014/EN 60601-1-2:2015(Medical electrical
equipment -- Part 1-2: General requirements for basic safety and essential performance -
Collateral standard: Electromagnetic compatibility - Requirements and tests), IEC80601-
2-30:2009+AMD1:2013/EN 80601-2-30:2010/A1:2015(Medical electrical equipment
–Part 2-30: Particular requirements for the basic safety and essential performance of
automated non-invasive sphygmomanometers)EN 1060-1: 1995 + A2: 2009 (Non-
invasive sphygmomanometers - Part 1: General requirements), EN 1060-3: 1997 + A2:
2009 (Non-invasive sphygmomanometers - Part 3: Supplementary requirements for
electro-mechanical blood pressure measuring systems);ISO81060-2:2013(Non-Invasive
Sphygmomanometers - Part 2:Clinical Validation Of Automated Measurement Type).
PRODUCT DESCRIPTION
To Next Page
Loading...
Need help?
General
