-19-
6.3. The result will be automatically stored in the memory bank.
d. After measurement, the monitor will turn off automatically after 1 minute of no
operation. Alternatively, you can press the “START” button to turn off the monitor
manually.
e. During measurement, you can press the “START” button to turn off the monitor
manually.
Note: Please consult a healthcare professional for interpretation of pressure
measurements.
7. DISPLAYING STORED RESULTS
a. After measurement, you can review the results in the memory bank by pressing the
“MEM” button. Alternatively, you can press “MEM” button in Clock Mode to display
the stored results. If it no result stored, LCD will show dashes as picture 7, while
press the button “MEM” or “START”, machine will turn off. If there are results in the
memory bank, the LCD will display the amount of the results in the memory bank.
See picture 7.1.
b. Then, the most recent result will be displayed with date and time stamp. See picture
7.2. The blood pressure and pulse rate will be shown separartely.
Irregular heartbeat symbol (if any) will blink. See picture 7.3 and 7.4. Press “MEM“
To Next Page
Loading...
Need help?
General
