What to do if my MedSource MS-131002 Thermometer screen is blank?
If your MedSource Thermometer screen is blank, it could be due to several reasons: * The power might be off: Press the On/Scan button. * Improper battery installation: Check the battery polarity. * The batteries are depleted: Replace the batteries.
What to do if MedSource MS-131002 Thermometer screen flickers and turns off?
If the screen of your MedSource Thermometer flickers and then turns off, the suggested solution is to replace the batteries. If the error persists after replacing the batteries, the device may be damaged.
How to fix MedSource Thermometer when temperature is out of range?
If the temperature measured by your MedSource Thermometer is not within the typical human body temperature range, make sure you are using the correct distance and location to measure the temperature. Also, do not attempt to measure temperatures outside the allowable range.
What is the correct distance for using a MedSource MS-131002 Thermometer?
To ensure accurate readings with your MedSource Thermometer, maintain a proper distance of 0.4” – 2.0” (1 cm – 5 cm).
General| Display | LCD |
|---|---|
| Auto Power Off | Yes |
| Type | Digital |
| Measurement Site | Oral, Axillary, Rectal |
| Battery | LR41 |
| Measurement Range | 32.0°C - 42.9°C (89.6°F - 109.2°F) |
| Accuracy | ±0.1°C (±0.2°F) |
| Resolution | 0.1°F (0.1°C) |
General safety guidelines for device usage.
Crucial precautions and prohibitions for safe operation.
Specific warning regarding use on children under two.
Defines the purpose and scope of the thermometer's application.
Explains the device's operating principles and components.
Identifies and explains device buttons, display elements, and symbols.
Lists thermometer applications and important equipment symbols.
Covers measurement units, range, accuracy, and operating conditions.
Covers power, physical properties, and compliance standards.
Step-by-step guide for inserting batteries.
Essential checks and environmental considerations before use.
Process for initiating and verifying device self-testing.
Explanation of Body and Surface temperature measurement modes.
Detailed steps and results for measuring body temperature.
Detailed steps and results for measuring surface temperature.
How to access and manage stored temperature readings.
Customizing units, fever threshold, audio, and temperature offset.
Important operational reminders and contact information.
Common error messages and their solutions for device issues.
Step-by-step guide and precautions for battery replacement.
Methods for cleaning the device and guidelines for optimal storage.
Proper disposal methods and information on device calibration.
Guidance on immunity to electromagnetic fields.
Information on the device's RF emissions.
Recommended distances for RF communication equipment.
To Next Page
