To Next PageTo Next PageWhy is the emergency program active on my Meiko Dishwasher?
The emergency program on your Meiko Dishwasher may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this.
Why does my Meiko DV 125.2 say maintenance required?
The Meiko Dishwasher indicates maintenance is required when the set operating hours or batch number has been reached. To resolve this, inform the service department and perform maintenance. Afterward, reset the maintenance counter.
What to do if Meiko Dishwasher says refill with salt?
If your Meiko Dishwasher indicates 'Refill with salt', it means there is no brine available. Check the salt supply and ensure there is water in the salt solution reservoir. Also, check if the float switch S5 is working.
What to do if Meiko DV 125.2 shows error in the dosing system ADT?
If you see an error in the ADT dosing system of your Meiko Dishwasher, it indicates that the flow meter is recognizing impulses even when detergent dosing is not in progress. This can happen if the valve of the dosing unit is not closing. In that case, you should check the valve of the dosing unit.
General| Brand | Meiko |
|---|---|
| Model | DV 125.2 |
| Category | Dishwasher |
| Language | English |
Outlines operator responsibility for safe operation and maintenance.
Covers fundamental safety precautions for machine operation.
Guidelines for safe transport, installation, and assembly of the machine.
Details electrical connection requirements, including qualified personnel and specific wiring.
Specifies fresh water connection requirements, pressure, and filtration.
How to switch off the machine completely in an emergency.
Steps and safety precautions for initial commissioning by qualified personnel.
Safety precautions to be taken during the cleaning process.
Indicates error messages related to the water softening device.
Provides common faults and their remedies for self-help troubleshooting.
How to use the keyboard for programming and navigating menus.
How to view and change individual service parameters.
Viewing and modifying parameters based on the entered access code.
A comprehensive list of machine parameters, their settings, and descriptions.
Guide to understanding and resolving information codes displayed by the machine.
Lists specific error codes, their descriptions, and possible causes.
A checklist for regular maintenance procedures for various machine components.
Details for viewing/modifying parameters, ventilating inlets, and starting regeneration.
Details on accessing and modifying service parameters for different machine models.
