3. You can start to ride.
A. It’s searching for GPS when LED indicator light is slow flashing.
B. After GPS positioning succeeds,the LED light will stay on with full
brightness. After 30seconds, it will turn off and blink one time per minute
as to remind the power status for user.
C. After the GPS positioning is successful, the time and date are
automatically updated according to the GPS.
D. After the GPS positioning is successful and the M3 works for a few
minutes, the altitude will be automatically calculated by GPS.
Altitude Display; Speed Display; Time Display
* The following actions cannot succeed if the device is in the place where
GPS signal cannot be found or received:
14
To Next Page
Loading...
