MELAG MELAprint 60 User Manual

User Manual
MELAprint
®
60
Label printer
EN
Dear doctor,
We thank you for your confidence demonstrated by the purchase of this MELAG product. As an owner-run and operated
family concern founded in 1951, we have a long history of successful specialization in hygiene products for practice-
based use. Our focus on innovation, quality and the highest standards of operational reliability has established MELAG
as the world’s leading manufacturer in the instrument treatment and hygiene field.
You, our customer are justified in your demand for the best products, quality and reliability. Providing "competence in
hygiene" and "Quality – made in Germany", we guarantee that these demands will be met. Our certified quality
management system is subject to close monitoring: one instrument to this end is our annual multi-day audit conducted in
accordance with ISO 13485 and ISO 9001. This guarantees that all MELAG products are manufactured and tested in
accordance with strict quality criteria.
The MELAG management and team.

MELAG MELAprint 60 Specifications

General

Print Technology	Thermal transfer
Print Resolution	300 dpi
Connectivity	USB
Display	LCD
Keyboard	Integrated
Supported Label Materials	Paper, synthetic

Summary

Safety Information

General Safety Precautions

Covers essential safety instructions for device operation, installation, and maintenance.

Device Description

Intended Use and Limitations

Commissioning and Setup

Connecting the Label Printer

Step-by-step guide for physically connecting the printer.

Inserting the Label Roll

Instructions on how to properly load label rolls into the printer.

Powering On the Label Printer

Setup on Steam Sterilizer (Method 1)

Guide for configuring the printer with a steam sterilizer directly.

Connecting in Practice Network (Method 2)

Instructions for integrating the printer into an existing network.

Network Configuration and IP Address

Steps to determine and adjust computer and printer network settings.

Adapting IP Address to Network

Guide to modify the printer's IP address for network compatibility.

Assigning Dynamic IP Address (DHCP)

Steps to configure the printer to obtain an IP address automatically via DHCP.

Connecting via MELAtrace (Method 3)

Instructions for setting up the printer with MELAtrace software.

Printing a Test Page

Settings and Configuration

Reading Printer Configuration (Self-Test)

Adapting Label Infeed (Calibration)

Resetting to Factory Settings

Maintenance Procedures

Routine Monthly Maintenance

Cleaning Print Head and Roller

Cleaning Paper Sensors

Troubleshooting Guide

Common Malfunctions and Solutions

Printer Not Recognized Issues

Comparing and Adjusting IP Addresses