To Next PageTo Next PageWhat does it mean when all buttons are flashing on my Melitta Caffeo Solo?
If all the buttons on your Melitta Coffee Maker are flashing continuously, this indicates a system error. Switch the appliance off and on again using the ON/OFF button. If the problem persists, send the appliance to the service department.
How to fix a Melitta Caffeo Solo Coffee Maker when coffee only drips?
If your Melitta Coffee Maker is only dispensing coffee drop-by-drop, the grinding fineness might be too fine. Adjust the grinding fineness to a more coarse setting. Also, clean the brewing unit and perform a descaling or cleaning program if necessary.
How to fix a Melitta Caffeo Solo Coffee Maker that only drips coffee?
If the coffee only flows drop by drop from your Melitta Coffee Maker, the grinding fineness might be too fine. Adjust the grinding fineness to a coarser setting. Additionally, clean the brewing unit. If the issue persists, run the integrated descaling and cleaning programs.
How to fix Melitta Caffeo Solo when grinder doesn't grind beans?
If your Melitta Coffee Maker's grinder isn't grinding coffee beans, it might be because the beans are not dropping into the grinder, possibly due to them being too oily. Try tapping lightly on the bean container to help the beans descend.
What to do if Melitta Caffeo Solo Coffee Maker coffee does not flow?
If coffee does not flow from your Melitta Coffee Maker, there might be a couple of reasons. First, ensure that the water tank is filled to the appropriate level and correctly inserted. Second, the brewing unit could be clogged, so cleaning it might solve the issue.
What does it mean when the symbols for cleaning and stand-by flash alternately on Melitta Caffeo Solo?
If the symbols for cleaning and stand-by are flashing alternately on your Melitta Coffee Maker, it could indicate that the brewing unit is missing or not properly inserted. Ensure the brewing unit is correctly inserted. Alternatively, the brewing chamber might be overfilled. In this case, switch off the appliance and switch it on again using the ON/OFF button (repeat if necessary) until standby mode is displayed.
What to do if the brewing unit of my Melitta Caffeo Solo can't be reinserted?
If you're having trouble reinserting the brewing unit, first check that the handle for locking the brewing unit is correctly engaged. If it still doesn't fit, switch the appliance off and then on again. Press the buttons for single- and two-cup dispensing simultaneously for longer than 2 seconds to put the actuator into the correct position. Then, reinsert the brewing unit and ensure it's correctly locked into place.
Why are the bean symbols flashing on my Melitta Caffeo Solo Coffee Maker when the container is full?
If the bean symbols are flashing even when the container is full, it indicates there might be an insufficient quantity of ground beans in the brewing chamber. Try pressing the buttons for single-cup dispensing or two-cup dispensing.
Why is the grinder not working on my Melitta Caffeo Solo?
If the grinder in your Melitta Coffee Maker isn't grinding, it may be because the beans are not falling into the grinder. Try tapping lightly on the bean container. If this doesn't solve the problem, there may be foreign objects in the grinder, call the hotline.
Why is my Melitta Coffee Maker not dispensing coffee?
If coffee isn't flowing from your Melitta Coffee Maker, it could be due to a couple of reasons. First, check that the water tank is filled and correctly inserted. Second, the brewing unit might be clogged, so try cleaning it.
General| Product type | Espresso machine |
|---|---|
| Self-cleaning | Yes |
| Capacity in cups | 2 cups |
| Coffee input type | Coffee beans |
| Appliance placement | Built-in |
| Type | Coffee/Espresso |
| Product color | Black |
| Built-in display | No |
Weight and Dimensions| Depth | 455 mm |
|---|---|
| Width | 200 mm |
| Height | 325 mm |
