Melitta Caffeo Solo - Inserting the Melitta Claris water filter

16
At a glance
Figure A
1
Drip tray with cup plate and coffee
grounds container as well as dis-
play for full drip tray
2 Height-adjustable outlet
3 Coffee quantity regulator
4
Button for single-cup dispensing
5
Button for two-cup dispensing
6 Water reservoir
7 Bean container
8
Button for coffee strength
9 Display
10
ON/OFF button
11
Right cover (removable, covering
the grinding neness adjustment
element, brewing unit and identi-
cation label)
Display
Illumina-
ted
The appliance is ready
for operation.
Flashing
Appliance is heating
up or coffee is being
dispensed.
Illumina-
ted
Change the Melitta
®
Claris
®
water lter
Flashing
Filter change in pro-
cess.
Illumina-
ted
Fill the water reservoir
Flashing
Insert the water reser-
voir
Illumina-
ted
Empty drip tray and
coffee grounds con-
tainer
Flashing
Insert the drip tray
and coffee grounds
container
Illumina-
ted
1 bean: mild
2 beans: normal
3 beans: strong
Flashing
Fill bean container;
ashing stops after
dispensing the next
coffee.
Illumina-
ted
Clean the appliance
Flashing
Integrated cleaning
programme is running.
Illumina-
ted
Descale the appliance
Flashing
Integrated descaling
programme is running.
1401-BA_Solo _041114_1C.indd 16 24.11.14 16:08