7�8�2 Opening product statistics
No.
SELECTION
PRODUCT
FILTER UNITPRODUCT OPERATION
Logout
PRODUCT NAME
Espresso
***
3
Product statistics
Total counter
Café Crème
Cappuccino
**
Hot water
Filter Export
Total (table):
Total: 3667
1 2
Fig. 35: Product statistics
1. Press the "Product statistics" button (3) to see how
many times a product has been dispensed.
2. Use the "" and "" buttons to move the list to
display all the programmed products.
3. Press the "Filter" button (1) to display products
according to various criteria.
9 The product statistics are opened.
You can export the product statistics list to a USB stick,
e.g., for further processing. The exported data will be
stored in CSV format in the USB stick's root directory.
4. Open the machine door using the key.
2
1
Fig. 36: Inserting the USB stick
5. Slide the cover on the inside of the machine door (1)
to the side.
6. Insert a suitable USB stick (2) into the USB slot.
͵ Not every USB stick is suitable for use. The ma-
chine door must be able to close when the USB
stick is inserted.
7. Close the machine door.
8. Press the Export" button (2) (see Fig. 35).
9. Select one of the following options:
• Press the "Filtered" button to only export the
displayed, filtered section of the product statis-
tics.
• Press the "All" button to export the entire product
statistics list.
10. Open the machine door.
11. Remove the USB stick and slide the cover back.
12. Close the machine door.
9 The product statistics list is exported.
7�8�3 Machine settings
Settings
Current language
SELECTION
PRODUCT
FILTER UNITPRODUCT OPERATION
Logout
Standard language
Configure language
selection and location
Operating mode
Self-service operation
Waiter operation settings
Waiter operation
Open batch (standard)
Allow product filter
Accounting
Quick start activated
Off Article management Production logging
1
2
Fig. 37: Machine settings
1. Press the "Settings" button (1) to display and edit the
basic settings for the machine.
2. Use the "" and "" buttons to move the list to
show all the settings options:
Button Settings
Current language Set the display language.
Standard
language
Language to be displayed by
default in self-service operation.
If a different language has
been set, this language will
be displayed again after five
minutes without any input.
Configure
language
selection and
location
Select the languages for "Current
language" and "Standard
language" and set the location
(country).
Operating mode Set the default mode for the
machine: Self-service or waiter
operation.
Settings
26
26646 • 20160202
7
To Next Page
Loading...
