EasyManuals Logo

Melitta SOLO User Manual

Melitta SOLO
Go to English
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Operating Instructions: Melitta
®
Solo
®
|
1828-0618 | 2018-08
19
Starting up the appliance
GB
Starting up the appliance
Commissioning
WARNING
Danger of re and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable!
Ensure that the supply voltage
corresponds to the supply voltage
speci ed on the identi cation label of
the appliance. The identi cation label is
located on the right side of the appliance
behind the cover (Image A, 11).
Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a quali ed
electrician.
Never use damaged power cables
(damaged insulation, bare wires).
Place the appliance on a stable, dry and
level surface with suf cient clearance
(at least 10 cm) to the sides.
Plug the power cable into a suitable
power socket.
Remove the lid from the bean
container 7.
Fill the bean container with suitable
coffee beans.
Put the lid back on.
Raise the lid of the water tank 6 and
pull the water tank up and out of the
appliance.
Fill the water tank with fresh tap water
only up to the max. mark.
Insert the water tank into the appliance.
Place a vessel under outlet 2.
Press the on/off
button to turn the
appliance on or off. The appliance may
perform an automatic rinse.
Preparation
Fill the water tank with fresh water every
day. The water tank must always be
lled with enough water for the operation
of the appliance.
Fill the bean container preferably with
espresso beans or bean mixtures for
fully automatic coffee machines.
Do not use any ground, glazed,
caramelised, or otherwise sugar-coated
coffee beans.
Setting the dispensed quantity and
strength
Turn the coffee quantity regulator 3 to
in nitely adjust the dispensed quantity.
Regulator all the way to the left
= 30 ml per cup
Regulator all the way to the right
= 220 ml per cup
Press the
button until the desired
strength is adjusted. The strength is
displayed by the beans on display 9
(from
= mild to = strong).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta SOLO and is the answer not in the manual?

Melitta SOLO Specifications

General IconGeneral
Milk tankNo
Product typeEspresso machine
Built-in grinderYes
Capacity in cups-2 cups
Number of spouts2
Coffee input typeCoffee beans
Coffee maker typeFully-auto
Country of originPortugal
Appliance placementCountertop
Water tank capacity1.2 L
Coffee beans capacity120 g
Maximum operating pressure15 bar
Reservoir for brewed coffeeCup
Number of temperature settings3
Control typeButtons, Rotary, Slider
Display typeLCD
Product colorSilver
Housing material-
Package depth545 mm
Package width300 mm
Package height380 mm
Package weight10500 g
Quantity per pack1 pc(s)
Customs code85167100
Number of cartons per pallet24 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth455 mm
Width200 mm
Height325 mm
Weight9000 g

Related product manuals