EasyManuals Logo

Melitta SOLO User Manual

Melitta SOLO
Go to English
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Operating Instructions: Melitta
®
Solo
®
|
1828-0618 | 2018-08
22
Cleaning and maintenance
GB
Integrated cleaning programme
The integrated cleaning programme (takes
about 15 minutes) removes residues and
coffee oil residues that cannot be removed
by hand. The cleaning symbol ashes
during the entire process.
The cleaning programme should be
performed every 2 months or after 200
brewed cups, however, at the latest when
is illuminated.
Before starting the cleaning programme,
clean the brewing group and the
interior ("Cleaning the brewing unit",
page 21).
Only use Melitta
®
PERFECT CLEAN
cleaning tabs.
Switch off the device.
Fill the water tank with tap water up to
the max. mark.
Insert the water tank.
Press the
and buttons
simultaneously for approx. 3 seconds.
ashes, illuminates.
Empty the drip tray and coffee grounds
container.
Insert the drip tray without the coffee
grounds container
Place the coffee grounds container
under outlet 2.
Cleaning phase 1 (
):
Two rinsing processes will be executed.
When
illuminates, proceed as follows:
Remove the brewing unit.
Put a cleaning tab in the brewing unit
(Image C).
Insert the brewing unit.
Cleaning phase 2 (
):
When illuminates, proceed as follows:
Fill the water tank with tap water up to
the max. mark.
Press outlet 2 all the way down.
Press the
button to continue with
the cleaning programme (takes about
5 minutes).
Cleaning phase 3 ( ):
When
illuminates, proceed as follows:
Empty the drip tray and coffee grounds
container.
Insert the drip tray without the coffee
grounds container
Place the coffee grounds container
under outlet 2.
Cleaning phase 4 (
, the middle
bean is ashing):
The cleaning programme will be
continued again and takes about
5 minutes.
When
illuminates, proceed as follows:
Empty the drip tray and coffee grounds
container and insert them in the
appliance as usual.
The cleaning programme is nished.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta SOLO and is the answer not in the manual?

Melitta SOLO Specifications

General IconGeneral
Milk tankNo
Product typeEspresso machine
Built-in grinderYes
Capacity in cups-2 cups
Number of spouts2
Coffee input typeCoffee beans
Coffee maker typeFully-auto
Country of originPortugal
Appliance placementCountertop
Water tank capacity1.2 L
Coffee beans capacity120 g
Maximum operating pressure15 bar
Reservoir for brewed coffeeCup
Number of temperature settings3
Control typeButtons, Rotary, Slider
Display typeLCD
Product colorSilver
Housing material-
Package depth545 mm
Package width300 mm
Package height380 mm
Package weight10500 g
Quantity per pack1 pc(s)
Customs code85167100
Number of cartons per pallet24 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth455 mm
Width200 mm
Height325 mm
Weight9000 g

Related product manuals