Operating Instructions: Melitta
®
Solo
®
|
1828-0618 | 2018-08
24
Transport, Storage and Disposal
GB
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
fl ashing
off
■ Press the button to confi rm the
setting.
Auto-OFF function
The appliance switches off automatically
after the last action (depending on the
setting). The appliance is factory-set at
30 minutes .
■ Switch on the device.
■ Press the
and buttons
simultaneously until
fl ashes.
■ Press the button three times.
illuminates.
■ Press the
button until one of the
four switch-off times is set. The time is
displayed by the beans on display 9.
Display Time
30 minutes
(factory setting)
2 hours
4 hours
fl ashing
8 hours
■ Press the button to confi rm the
setting.
Brewing temperature
From the factory, the brewing temperature
is set to Level 2 (medium
).
■ Switch on the device.
■ Press the
and buttons
simultaneously until
fl ashes.
■ Press the
button four times.
illuminates.
■ Press the
button, until one of the
three brewing temperatures is set. The
temperature is shown by the beans
on the display 9 (from
= low to
= high).
■ Press the
button to confi rm the
setting.
Adjusting the grinding fi neness
The grinding fi neness was set before the
appliance was delivered. We therefore
recommend to only adjust the grinding
fi neness after about 1 000 coffee
preparations (about 1 year).
The grinding fi neness should only be
adjusted immediately after starting coffee
dispensing and only while the mill is
running.
■ Pull off the cover 11 to the right.
■ Start dispensing coffee.
■ Put the lever (Image E) in a desired
position
(left = fi ne to right = coarse).
■ Insert the cover and swivel to the left
until it clicks in.