Melitta SOLO User Manual

Operating Instructions: Melitta
®
Solo
®
| 1828-0618 | 2018-08
23
Other settings
GB
Integrated descaling programme
WARNING
The descaling agent can cause skin
irritations!
▶ Comply with the safety instructions
and the dosing information specifi ed
on the descaling agent packaging.
The integrated descaling programme
(takes about 30 minutes) removes lime
residues inside the appliance. The symbol
for descaling
fl ashes during the entire
process.
The descaling programme should be
performed every 3 months, however, at
the latest when
illuminates ("Setting
the water hardness", page 21).
Only use Melitta
®
ANTI CALC.
■ Switch off the device.
■ Remove the water fi lter if necessary
("Water hardness and fi lter", page 20).
■ Press the
and buttons
simultaneously for approx. 3 seconds.
fl ashes, illuminates.
Descaling phase 1 (
):
■ Empty and reinsert the drip tray.
illuminates.
■ Completely empty the water tank.
■ Add the descaling agent to the water
tank according to the instructions on the
packaging.
■ Insert the water tank.
■ Press the
button to start the
descaling programme
(takes about 15 minutes).
Descaling phase 2 ( ):
When
illuminates, proceed as follows:
■ Empty and reinsert the drip tray.
illuminates.
■ Remove the water tank and rinse
thoroughly.
■ Fill the water tank with tap water up to
the max. mark.
■ Insert the water tank.
■ Press the
button to continue with
the descaling programme (takes about
5 minutes).
Descaling phase 3 ( ):
When
illuminates, proceed as follows:
■ Empty and reinsert the drip tray.
When
is illuminated, the descaling
programme is fi nished.
■ Insert the water fi lter if necessary
("Water hardness and fi lter", page 20).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is factory-set at 5 minutes .
■ Switch on the device.
■ Press the
and buttons
simultaneously until fl ashes.
■ Press the button twice.
illuminates.
■ Press the
button until one of the four
times is set. The time is displayed by the
beans on display 9.

Melitta SOLO Specifications

General

Milk tank	No
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	-2 cups
Number of spouts	2
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Country of origin	Portugal
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	120 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary, Slider
Display type	LCD
Product color	Silver
Housing material	-
Package depth	545 mm
Package width	300 mm
Package height	380 mm
Package weight	10500 g
Quantity per pack	1 pc(s)
Customs code	85167100
Number of cartons per pallet	24 pc(s)

Weight and Dimensions

Depth	455 mm
Width	200 mm
Height	325 mm
Weight	9000 g