Memmert ULE 400 - Changing control panel

UE/BE 200-800, SE 200-400, ULE/SLE 400-800
UP/BP/ULP/SLP 400-800
3
3 Changing of control panel
 Remove top cover (see chap. 1)
 Disconnect all cables from main switch, temperature controller and safety device unit.
 Open the door.
 On the right upper door hinge unscrew the left one of the two screws (1) approx. 5 mm.
 Slide the control panel to the left and remove it forwards with all control modules (main
switch, temperature controller and safety device).
1