10
Press the POWER button to turn
the unit on; the POWER indicator
will light.
1
The CD player will read the table
of contents on the disc and the
total number of tracks on the disc
will appear in the display.
4
Press the CD Door OPEN/
CLOSE button to open the CD
compartment door. Place a CD in
the compartment, with the printed
label side facing up. Press the CD
Door OPEN/CLOSE button to
close the CD compartment door.
3
Slide the FUNCTION switch to
the CDG position.
2
Press the Play/Pause ( )
button to begin playback on
Track 1; the PLAY/PAUSE
indicator will light.
5
Adjust the MASTER VOLUME ❶
and TONE ❷ controls as desired.
Playback will continue until all of
the tracks on the disc have been
played.
6
To stop playback before the disc
ends, press the Stop (■) button.
The disc will stop and the display
will show the total number of
tracks.
7
After the last track has been
played, the disc stops auto-
matically and the display shows
the total number of tracks on the
disc. If you are finished listening,
press the CD Door OPEN/CLOSE
button to open the CD
compartment door.
8
Remove your disc, press the CD
Door OPEN/CLOSE button ❶ to
close the CD compartment door
and press the POWER button ❷
to turn the unit off.