User Menu 1 Selecting Chime
This option allows you to enable or disable
the chime feature for your wards. If a ward
has the chime feature enabled, detection
circuits that have been programmed as
"Chime" will generate a chime tone when
activated.
1. At the remote keypad enter your
passcode followed by
[.
2. Press 5 followed by [ to select the
chime option.
3. The display will show which wards are
currently selected for chime.
4. To select or deselect wardsA-Hpress 1
- 8. To select or de-select wardsI-P
press
A then 1 - 8.
5. Once you have the required wards
selected press
[ to accept.
6. Press ] twice to return the system to its
original state.
27
SYSTEM OPEN
17:30 Sun 01 JAN
User menu 1
Select option :-
User menu 1
Select chime
Chime on wards
A,B,C,D,E,.,.,.
User menu 1
Select chime
SYSTEM OPEN
17:40 Sun 01 JAN
5
ENT
ENT
???? ? ? ?
ENT
ENT
Select/deselect wards
ESCESCESC ESC
1
A/
8
C
or
-
To Next Page
Loading...
