MerCruiser 3.0 MPI User Manual

Section 5 - Maintenance
90-899883272 MARCH 2008 Page 69
Throttle Cable
1. Lubricate the pivot points and the guide contact surfaces with oil.
32586
a
a
b
a - Pivot points
b - Guide contact surfaces
Shift Cable ‑ Typical
1. Lubricate the pivot points and the guide contact surfaces.
mc79736
a
b
a - Pivot points
b - Guide contact surfaces
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Shift cable pivot points & guide
contact surfaces
92‑883725K01

MerCruiser 3.0 MPI Specifications

General

Horsepower	135 hp (101 kW)
Ignition	Electronic
Cylinders	4
Aspiration	Naturally Aspirated
Compression Ratio	9.3:1
Full Throttle RPM	4400-4800 RPM
Displacement	3.0L / 181 CID
Fuel System	Multi-Port Injection (MPI)
Bore x Stroke	4.00" x 3.60" (101.6mm x 91.4mm)
Fuel Requirement	87 Octane Minimum
Engine Type	Inline 4
Cooling System	Raw water
Alternator Output	65 amp