EasyManua.ls Logo

MerCruiser Sterndrive 4.3 MPI User Manual

MerCruiser Sterndrive 4.3 MPI
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2007 Mercury Marine Gasoline Engines - Sterndrive MPI Models 90-864195070 607
NOTE: The following applies to CE marked products only.
Declaration of Conformance – Mercury MerCruiser
This sterndrive or inboard engine when installed in accordance to Mercury
MerCruisers’ instructions complies with the requirements of the following directives
by meeting the associated standards, as amended:
Recreational Craft Directive 94/25/EC; 2003/44/EC
Applicable Requirement Standards Applied
Owner’s manual (A.2.5) ISO 10240
Openings in Hull, Deck and superstructure (A.3.4) ISO 9093‑1; ISO 9093‑2
Handling characteristics (A.4) ISO 8665
Inboard Engine (A.5.1.1) ISO 15584; ISO 10088; ISO 7840; ISO 10133
Fuel System (A.5.2) ISO 10088; ISO 7840; ISO 8469
Electrical System (A.5.3) ISO 10133; ISO 8846
Steering system (A.5.4)
Applicable portions of: ISO 10592, ISO 8848 and
ABYC P‑17
Exhaust emission requirements (B.2) ISO 8178
Owner’s manual (B.4) ISO 8665
Noise emission levels (C.1) ISO 14509
Ignition‑protected equipment (Annex II) ISO 8846; SAE J1171; SAE J1191; SAE J 2031
Mercury MerCruiser declares that our sterndrive or inboard engines without integral
exhaust, when installed in a recreational craft, in accordance with the manufacturers
supplied instructions, will meet the exhaust emissions requirements of the directive
mentioned above. This engine must not be put into service until the recreational craft
in which it is to be installed has been declared in conformity, if so required, with the
relevant provision of the directive.
Electromagnetic Compatibility Directive 89/336/EC, 92/31/EEC and 93/68/EEC
Generic emission standard EN 50081‑1
Generic immunity standard EN 50082‑1
Vehicles, boats and internal combustion engine
driven devices Radio disturbance characteristics
SAE J551 (CISPR 12)
Electrostatic discharge testing EN 61000‑6‑2; EN 61000‑4‑2; EN61000‑4‑3
The notified body responsible for surveillance of the quality system under Full Quality Assurance
Module H of Directive 2003/44/EC is:
Det Norske Veritas
Norway
Notified Body Number: 0575
This declaration is issued under the sole responsibility of Mercury Marine and Mercury MerCruiser.
Patrick C. Mackey
President ‑ Mercury Marine, Fond du Lac, WI USA

Table of Contents

Questions and Answers:

MerCruiser Sterndrive 4.3 MPI Specifications

General IconGeneral
Engine TypeV6
Fuel SystemMulti-Port Fuel Injection (MPI)
Horsepower220 hp
Full Throttle RPM Range4400-4800 RPM
Compression Ratio9.4:1
Displacement4.3L (262 cid)
Cooling SystemWater-cooled
Bore x Stroke4.00 x 3.48 in (101.6 x 88.4 mm)
Fuel Type87 Octane

Summary

Declaration of Conformance – Mercury MerCruiser

Recreational Craft Directive Compliance

Details compliance with Recreational Craft Directive 94/25/EC; 2003/44/EC.

EMC Directive Compliance

Details compliance with Electromagnetic Compatibility Directive 89/336/EC, 92/31/EEC and 93/68/EEC.

Section 1 - Warranty

Warranty Registration Procedures

Outlines steps for registering the product warranty in the US, Canada, and internationally.

Limited Warranty Details

Covers what is warranted, duration, and conditions for recreational and commercial use.

Corrosion Warranties

Specifies limited warranties against corrosion for different models.

Section 2 - Getting to Know Your Power Package

Remote Control Systems

Covers Non-DTS, DTS, Panel Mount, Console Mount, Dual Engine, and Zero Effort controls.

Section 3 - On The Water

Section 4 - Specifications

Section 5 - Maintenance

Responsibilities and Schedule

Defines owner, dealer responsibilities and outlines maintenance schedules.

Fluid Maintenance Procedures

Step-by-step guides for changing engine oil, steering fluid, coolant, and drive unit oil.

Section 6 - Storage

Storage Preparation Guidelines

Instructions for cold weather storage, preparing the power package, and systems.

Seawater System Draining

Procedures for draining the seawater system and identifying drain points.

Section 7 - Troubleshooting

System Diagnostics

Guides for diagnosing EFI, DTS, and Engine Guardian system issues.

Engine Starting and Running Problems

Troubleshooting steps for issues like no start, rough running, and poor performance.

Related product manuals