MAINTENANCE
77
Inspection and Maintenance
Inspect the power package often and at regular intervals to help
maintain its top operating performance, and correct potential
problems before they occur. The entire power package should be
checked carefully, including all accessible engine parts.
1. Check for loose, damaged or missing parts, hoses and
clamps; tighten or replace as required.
2. Check plug leads and electrical leads for damage.
3. Remove and inspect the propeller. If nicked, bent or cracked,
see your authorized Mercury Marine dealer.
4. Repair nicks and corrosion damage on the power package's
exterior finish. Use Quicksilver spray paints ‑ see your
authorized Mercury Marine dealer.
Attention Required After Submersion
• Before recovery, contact an authorized Mercury Marine
dealer.
• After recovery, immediate service by an authorized Mercury
Marine dealer is required to prevent serious damage to power
package.
Maintenance Log
Record all maintenance performed on your outboard here. Be sure
to save all work orders and receipts.
Date Maintenance Performed Engine Hours
To Next Page
Loading...
Need help?
General
