COLD WEATHER OR EXTENDED STORAGE
81
Draining Instructions
NOTICE
Avoid cooling system and engine damage. Water trapped in the
seawater section of the cooling system can cause corrosion
damage, freeze damage, or both. Ensure the seawater section
of the cooling system is drained immediately after operation, or
before any length of storage in cold weather, if the possibility of
freezing temperatures exists. If the boat is in the water, keep the
seacock closed until restarting the engine to prevent water from
flowing back into the cooling system. If the boat is not fitted with
a seacock, leave the water inlet hose disconnected and plugged.
NOTE: As a precautionary measure, attach a tag to the key switch
or steering wheel of the boat reminding the operator to open the
seacock or unplug and reconnect the water inlet hose before
starting the engine.
IMPORTANT: The boat must be as level as possible to ensure
complete draining of cooling system.
To Next Page
Loading...
Need help?
General
