MAINTENANCE
75
4. Supercharger Belt ‑ Self‑tensioning
a - Supercharger pulley
b - Supercharger drive belt
c - Crankshaft pulley
d - Idler pulleys
e - Belt tensioner
Corrosion and Corrosion Protection
Add info about replacing anodes in the flywheel coolers
Whenever two or more dissimilar metals (like those found on the
sterndrive) are submerged in a conductive solution, such as saltwater,
polluted water, or water with a high mineral content, a chemical reaction
takes place causing electrical current to flow between metals. The
electrical current flow causes the metal that is most chemically active, or
anodic, to erode. This is known as galvanic corrosion and, if not
controlled, it will in time cause the need for replacement of power package
components exposed to water.
Refer to the Quicksilver booklet, Everything You Need to Know About
Marine Corrosion for more corrosion information.
To Next Page
Loading...
Need help?
General
