MAINTENANCE
79
b. If using copper or tin based anti‑fouling paints, avoid any
electrical interconnection between the Mercury Marine Product,
anodic blocks, and the paint by allowing a minimum of 40 mm
(1.5 in.) unpainted area on the transom of the boat around these
items.
a - Anti‑fouling paint
b - Unpainted area
IMPORTANT: Corrosion damage that results from the improper
application of anti‑fouling paint will not be covered by the limited
warranty.
NOTE: Do not paint anodes or the MerCathode System reference
electrode and anode, as this will render them ineffective as galvanic
corrosion inhibitors.
2. Painting Drive Unit or Transom Assembly
To Next Page
Loading...
Need help?
General
