Mercury 125 OptiMax User Manual

1. The water pressure tube is coiled and attached on the side of the engine.
Cut the cable tie and route the water pressure tube out through the
grommet.
a - Water pressure tube
2. Remove the plug from the coupler and make the connection. A barb fitting
(22‑859731) can be installed for larger diameter hose connection.
a - Plug
b - Coupler
c - Barb fitting (22‑859731)
a
23702
c
a
b
23708
OUTBOARD INSTALLATION
140 eng

Mercury 125 OptiMax Specifications

General

Brand	Mercury
Model	125 OptiMax
Category	Outboard Motor
Language	English