Mercury 135 Optimax User Manual

OUTBOARD INSTALLATION
58
4. Lift the outboard and place it on the boat transom.
Lifting Eye 91-90455--1
2756
Threads into the flywheel to remove the
powerhead assembly from the driveshaft
housing, or to lift entire engine for removal/
installation.
Steering Cable - Starboard Side Routed Cable
1. Lubricate O-ring seal and entire cable end.
3724
95
Tube Ref No. Description Where Used Part No.
95
2-4-C Marine Lubricant with
Teflon
O-ring seal and entire cable
end
92-802859Q1
2. Insert steering cable into tilt tube.
3725

Mercury 135 Optimax Specifications

General

Starting	Electric
Exhaust	Through Prop
Horsepower	135 HP
Fuel Induction System	Direct Fuel Injection
Alternator Amp	60 Amp
Shaft Length	20", 25"
Full Throttle RPM	5250-5750
Steering	Hydraulic