Mercury 15 FourStroke User Manual

ENGINE INSTALLATION
117
a. Move the remote control handle from neutral into forward
and advance the handle to full speed position. Slowly return
the handle back to neutral. Place a mark ("a") on the cable
next to the end guide.
b. Move the remote control handle from neutral into reverse
and advance the handle to full speed position. Slowly return
the handle back to neutral. Place a mark ("b") on the cable
next to the end guide.
c. Make a center mark ("c"), midway between marks ("a" and
"b"). Align the end guide with this center mark when
installing cable to the engine.
6098
b
c
a
2. Position the remote control handle into neutral.
3. Manually move the shift lever on the engine forward to gain
clearance for attaching the cable.

Mercury 15 FourStroke Specifications

General

Brand	Mercury
Model	15 FourStroke
Category	Outboard Motor
Language	English