Top Cowl Removal and Installation
REMOVAL
Unlock the top cowl by pulling out on the rear cowl latch. Lift the top cowl off the
engine.
INSTALLATION
1. Lower the top cowl over the engine.
2. Bring the front of the cowl down first and engage the front cowl hook.
Lower the cowl into the seated position and apply pressure to the back of
the cowl to lock it in place. Ensure the cowl is securely fastened by trying
to pull up on the back of the cowl.
Cleaning Care for Top and Bottom Cowls
IMPORTANT: Dry wiping (wiping the plastic surface when it is dry) will result in
minor surface scratches. Always wet the surface before cleaning. Do not use
detergents containing hydrochloric acid. Follow the cleaning and waxing
procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the cowls with clean water to remove dirt and dust
that may scratch the surface.
MAINTENANCE
eng 65
To Next Page
Loading...
Need help?
General
