FEATURES AND CONTROLS
42
2. Trim switch (if equipped) - Pressing the trim switch allows the
engine to trim up or down.
5185
3. Control handle tension adjustment screw - This screw can be
adjusted to increase or decrease the tension on the control
handle (cover must be removed). This will help prevent
unwanted motion of the remote control handle in rough water.
Turn the screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to the desired
tension.
4. Detent tension adjustment screw - This screw can be adjusted
to increase or decrease the effort to move control handle out
of detent positions (cover must be removed). Turning the
screw clockwise will increase tension. Adjust to the desired
tension.
a
b
ob01170
+
-
a - Detent tension
adjustment screw
b - Control handle tension
adjustment screw
5. Arrow trackpad - Navigates through the System View
on-screen function messages.
To Next Page
Loading...
