FEATURES AND CONTROLS
eng 89
7. 1 lever button ‑ Pressing the "1 LEVER" button initiates
single lever mode. Single lever mode enables the throttle
and shift functions of both engines to be controlled by the
port control handle. To turn off single lever mode, shift the
engine into neutral and press the "1 LEVER" button.
8. Sync button ‑ Pressing the "SYNC" button turns off or on the
auto synchronization feature. Refer to Synchronizing
Engines.
a - Neutral LEDS
b - Troll button
c - Transfer button
d - Dock button
e - Throttle only
f - 1 lever button
g - Sync button
9. Control handle tension adjustment screw ‑ This screw can
be adjusted to increase or decrease the tension on the
control handle (cover must be removed). This will help
prevent unwanted motion of the handle in rough water. Turn
the screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to tension
desired.
N
E
U
T
R
A
L
22945
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY
DOCK
TRANSFER
+
-
a
b
c
e
g
f
d
To Next Page
Loading...
Need help?
General