MAINTENANCE
114 eng
Before servicing any part of the fuel system, stop the engine and
disconnect the battery. Drain the fuel system completely. Use an
approved container to collect and store fuel. Wipe up any
spillage immediately. Material used to contain spillage must be
disposed of in an approved receptacle. Any fuel system service
must be performed in a well‑ventilated area. Inspect any
completed service work for sign of fuel leakage.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling,
leaks, hardness, or other signs of deterioration or damage. If any
of these conditions are found, the fuel line or primer bulb must be
replaced.
FUEL FILTER REPLACEMENT
Removal
1. Use the fuel filter removal/installation tool or the shaft of a
screwdriver between the lugs on the filter cap and unscrew
the filter.
Fuel Filter Removal/Installation Tool
91‑896661
Aids in the removal and installation
of the fuel filter cap assembly.
To Next Page
Loading...
