FEATURES AND CONTROLS
84 eng
Port Engine
Center
Engine
Starboard
Engine
Control Handle Function
Running Running Running
Port engine throttle and shift =
controlled by port control handle
Starboard engine throttle and shift
= controlled by starboard control
handle
Center engine throttle = average of
port and starboard engines
Center engine shift = neutral
unless both engines are in the
same gear
Running Running Off
Port and center engine throttle and
shift = controlled by port control
handle
Off Running Running
Starboard and center engine
throttle and shift = controlled by
starboard control handle
Running Off Running
Port engine throttle and shift =
controlled by port control handle
Starboard engine throttle and shift
= controlled by starboard control
handle
Running Off Off
Port engine throttle and shift =
controlled by port control handle
Off Off Running
Starboard engine throttle and shift
= controlled by starboard control
handle
Off (ignition
key switch
turned on)
Running
Off (ignition
key switch
turned on)
Center engine throttle and shift =
neutral/idle unless both control
handles are in the same gear
Turning off one of the outer engines while underway will cause
the center engine to go into forced neutral/idle. Operation to the
center engine can be restored by moving the control handle of
the functioning outer engine back into neutral position and then
reengaging. The center engine speed and gear shift will then be
controlled by the functioning outer engine.
Turning off the center engine while underway will have no effect
on the operation of the outer engines.
To Next Page
Loading...
Need help?
General