Mercury 25 Jet 4-Stroke - Page 118

ENGINE INSTALLATION
112
6. Readjust the throttle cable barrel if the cam roller is touching
the cam.
a
b
15952
a - Throttle cam b - Cam roller
7. Install the cable grommet.
8. Secure the throttle cable barrel with the cable barrel retainer.
9. Tighten the cable barrel retainer bolt to the specified torque.
a
b
c
24903
a - Cable barrel retainer
b - Cable barrel retainer
bolt
c - Cable grommet
Description Nm lb. in. lb. ft.
Cable barrel retainer bolt 6 53