OPERATION
43
• Always shift the outboard into gear with a quick motion.
• After shifting the outboard into gear, advance the remote control lever or rotate the throttle grip
(tiller handle) to increase speed.
Stopping The Engine
1. Remote Control Models - Reduce engine speed and shift outboard to neutral position. Turn
ignition key to "OFF" position.
2. Tiller Handle Models - Reduce engine speed and shift outboard to neutral position. Push in the
engine stop button or turn ignition key to "OFF" position.
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and follow procedure.
NOTE: EFI models - Engine must have a fully charged battery to start the engine.
1. Remove flywheel cover or manual starter assembly.