Mercury 40 4-Stroke User Manual

STORAGE
64
Gearcase
• Drain and refill the gearcase lubricant (refer to Maintenance - Gearcase Lubrication).
Positioning Outboard for Storage
Store outboard in an upright (vertical) position to allow water to drain out of outboard.
NOTICE
Storing the outboard in a tilted position can damage the outboard. Water trapped in the cooling
passages or rain water collected in the propeller exhaust outlet in the gearcase can freeze. Store the
outboard in the full down position.
Battery Storage
• Follow the battery manufacturer's instructions for storage and recharging.
• Remove the battery from the boat and check water level. Recharge if necessary.
• Store the battery in a cool, dry place.
• Periodically check the water level and recharge the battery during storage.

Mercury 40 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	40 hp
Cylinders	3
Fuel Induction System	Electronic Fuel Injection (EFI)
Starting	Electric
Displacement	747 cc
Shaft Length	20 in
Dry Weight	216 lbs
Steering	Remote
Alternator Amp	18 amp / 226 watt
Full Throttle RPM	5500 - 6000 RPM