Mercury 40 4-Stroke User Manual

MAINTENANCE
62
5. Remove lubricant tube and reinstall cleaned fill/drain plug and sealing washer.
26975
a
b
c
a - Vent hole
b - Vent plug
c - Fill/drain plug
Submerged Outboard
A submerged outboard will require service within a few hours by an authorized dealer once the outboard
is recovered from the water. This immediate attention by a servicing dealer is necessary once the engine
is exposed to the atmosphere to minimize internal corrosion damage to the engine.

Mercury 40 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	40 hp
Cylinders	3
Fuel Induction System	Electronic Fuel Injection (EFI)
Starting	Electric
Displacement	747 cc
Shaft Length	20 in
Dry Weight	216 lbs
Steering	Remote
Alternator Amp	18 amp / 226 watt
Full Throttle RPM	5500 - 6000 RPM