Mercury 40 4-Stroke - Page 64

MAINTENANCE
58
• Co-pilot shaft (tiller handle models) - Lubricate through fitting. Move the steering friction lever
back and forth while lubricating.
28823
•
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to serious injury or death from loss of
boat control. Completely retract the end of the steering cable before applying lubricant.
Steering Cable Grease Fitting (If equipped) - Rotate steering wheel to fully retract the steering
cable end into the outboard tilt tube. Lubricate through fitting.
b
a
28468
a - Fitting b - Steering cable end
3. Lubricate the following with light weight oil.
• Steering Link Rod Pivot Points - Lubricate points.
28471