Mercury 40 User Manual

OPERATION
57
2. Open fuel tank vent screw (in filler cap) on manual venting type
fuel tanks.
19748
3. Connect the fuel line to the outboard.
3106
4. Squeeze the fuel line primer bulb several times until it feels
firm.
19779
5. Set the lanyard stop switch to "RUN" position. Refer to
General Information ‑ Lanyard Stop Switch.
19791
6. Shift outboard to neutral (N) position.
N
26838

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000