Mercury 40 User Manual

MAINTENANCE
87
• Steering Link Rod Pivot Points ‑ Lubricate points.
3114
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt lock pin.
3115
2. Remove fill cap and check fluid level. The fluid level should be
even with the bottom of the fill hole. Add Quicksilver or
Mercury Precision Lubricants Power Trim & Steering Fluid. If
not available, use automotive (ATF) automatic transmission
fluid.
27683

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000