Mercury 40 User Manual

MAINTENANCE
86
• Shift Handle (Tiller Handle Models) ‑ Lubricate through
fittings.
3091
• Steering Cable Grease Fitting (If equipped) ‑ Rotate
steering wheel to fully retract the steering cable end into
the outboard tilt tube. Lubricate through fitting.
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to
serious injury or death from loss of boat control. Completely
retract the end of the steering cable before applying lubricant.
3113
a
b
a - Fitting b - Steering cable end
3. Lubricate the following with light weight oil.

Mercury 40 Specifications

General

Horsepower	40 hp
Starting System	Electric
Steering	Remote
Fuel Induction System	EFI (Electronic Fuel Injection)
Shaft Length	20"
Full Throttle RPM Range	6000