EMISSIONS INFORMATION
3
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on the
engine at time of manufacture.
SPARK PLUG:
GAP:
EMISSION CONTROL
INFORMATION
THIS ENGINE CONFORMS TO
EMISSION REGULATIONS FOR SPARK IGNITION MARINE ENGINES
CALIFORNIA AND U.S. EPA
REFER TO OWNERS MANUAL FOR REQUIRED MAINTENANCE,
SPECIFICATIONS, AND ADJUSTMENTS
IDLE SPEED (in gear):
FAMILY:
FEL:
TIMING (IN DEGREES):
COLD VALVE
CLEARANCE (mm)
INTAKE:
EXHAUST:
g/kWh
hp
cc
21096
e
d
c
b
a
f
g
h
i
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Date of manufacture
e - Valve clearance (if
applicable)
f - Family number
g - Maximum emission
output for the engine
family
h - Timing specification
i - Recommended spark
plug and gap
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner that
would alter the horsepower or allow emissions levels to exceed
their predetermined factory specifications.
Warranty Coverage
Mercury Racing does not offer a warranty with this power package.
To Next Page
Loading...
Need help?
General
