OUTBOARD INSTALLATION
81
NOTE: For a more accurate torque, turn/tighten the mounting
locknuts rather than turning the mounting bolts.
a - 1/2 in. diameter bolt (4)
b - Flat washer (4)
c - Locknut (4)
Description Nm lb. in. lb. ft.
Outboard mounting locknuts and bolts 75 55
Steering Arm Installation
IMPORTANT: Fasten the steering arms using the provided
hardware. The locknuts must never be replaced with common nuts
(non‑locking) as they will work loose and vibrate off, freeing the
steering arms.
To Next Page
Loading...
