GENERAL INFORMATION
6
!
WARNING
Starting the engine with the drive in gear can cause serious injury
or death. Never operate a boat that does not have a
neutral‑safety‑protection device.
Remote Steering Notice
Fasten the steering cables to the steering arms utilizing a secure
method that will not work loose and vibrate off, enabling the
steering cables to disengage.
!
WARNING
Damaged or loose steering components can lead to loss of
steering control, which can cause serious injury or death.
Properly secure all steering components to prevent them from
becoming loose or disengaged. All steering hardware and
fastening components must be appropriate for the application.
Lanyard Stop Switch
The purpose of a lanyard stop switch is to turn off the engine when
the operator moves far enough away from the operator's position
(as in accidental ejection from the operator's position) to activate
the switch. Tiller handle outboards and some remote control units
are equipped with a lanyard stop switch. A lanyard stop switch can
be installed as an accessory ‑ generally on the dashboard or side
adjacent to the operator's position.
To Next Page
Loading...
