ii
Throughout this publication, dangers, warnings, cautions, and
notices, accompanied by the international HAZARD symbol
!
,
are used to alert the technician to special instructions concerning
a particular service or operation that may be hazardous if
performed incorrectly or carelessly. These safety alerts follow
ANSI standard Z535.6‑2006 for product safety information in
product manuals, instructions, and other collateral materials.
Observe these safety alerts carefully.
These safety alerts alone can not eliminate the hazards they
signal. Strict compliance to these special instructions when
performing the service, and common sense operation are major
accident prevention measures.
!
DANGER
Indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
!
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
!
CAUTION
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in engine
or major component failure.
IMPORTANT: Identifies information essential to the successful
completion of the task.
NOTE: Indicates information that helps in the understanding of a
particular step or action.
To Next Page
Loading...
Need help?
General
