Configuring Your System Model 700A User's Manual
Page 11-8 Information in this document is subject to change without notice!!!
• during resume from suspend (see Suspend Option in Chapter 11.6), if the Resume
Password (refer to below in Chapter 11.5) is enabled.
• to unlock the keyboard, if keyboard is locked by pressing Ctrl-Alt-Backspace.
Boot Password Required:
There are two options to this field: No, and Yes. If this option is set to Yes and when
Supervisor Password and/or User Password have been set, system would prompt for
password during system boot up. In order to access the system, you need to enter either
the Supervisor Password or the User Password.
Resume Password Required:
This option can be set only if the Boot Password is enabled. There are two options to this
field: No, and Yes. If this option is set to Yes and when Supervisor Password and/or
User Password have been set, system would prompt for password when resuming from
suspend (see Suspend Option in Chapter 11.6). In order to access the system, you need
to enter either the Supervisor Password or the User Password.
To Next Page
Loading...