Mercury 700A - 11.8 Peripheral Setup

Configuring Your System Model 700A User's Manual
Page 11-16 Information in this document is subject to change without notice!!!
11.8 Peripheral Setup
You will be greeted by this screen when you enter the Peripheral Setup Menu:
AMIBIOS SETUP - PERIPHERAL SETUP
( C ) 1998 American Megatrends, Inc. All Rights Reserved
Internal Hard Drive
Enabled
OnBoard Serial Port1
Auto
OnBoard Parallel Port1
ECP
Available Options:
Enable
Disabled
ESC: Exit ↑↓: Sel
PgUp/PgDn: Modify
F3/F4: Color
Internal Hard Drive:
There are two options to this field: Enable, and Disabled. In general, you should choose
Enabled.
OnBoard Serial Port1:
There are two options to this field: Auto, and Disabled. In general, you should choose
Auto.
OnBoard Parallel Port1:
There are three options to this field: Normal, EPP and ECP. In general, you should
choose ECP.