MAINTENANCE
45
1. Shift outboard to neutral (N) position.
N
ob00351
2. Straighten the bent tabs on the propeller nut retainer.
ob00376
3. Place a block of wood between gearcase and propeller to hold propeller and remove propeller nut.
ob00377
4. Pull propeller straight off shaft.
5. Coat the propeller shaft with Quicksilver or Mercury Precision Lubricants Anti-Corrosion Grease or 2-4-
C with Teflon.
ob00378
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867Q1
95
2-4-C Marine Lubricant
with Teflon
Propeller shaft 92-802859Q1
To Next Page
Loading...
